Solar Power Meter - AcuDC 200

1.DC power system metering 2.Applicable to Solar and Wind Energy Systems 3.Voltage, Current, Energy and Power 4.RS485, Modbus

INTRODUCTION

AcuDC 200 series DC power meter can be used for monitoring and controlling in DC systems. These meters can measure a wide range of parameters such as voltage, current, power and energy. There are digital inputs for switch monitoring and relay outputs for remote controlling as well as an over-range alarming feature for voltage and current. Large signals, such as current and voltage can be converted to smaller signals using AO output. All data in the meter is accessible via RS485 using open Modbus RTU protocol.

APPLICATIONS

• Solar and Wind Energy Systems

• Large UPS Systems

• DC Energy Management Systems

• Industrial Control Systems

FEATURES

• DC power system metering

• Monitor and control power switches

• Alarming and analog output

• 96×48mm, can be installed on power panel• Can be used in SCADA, PLC systems• Large characters, vivid LCD; High light blue backlight• Wide operation temperature range

FUNCTION LIST

AcuDC 200 series DC power meter can be used for monitoring and controlling in DC systems. These meters can measure a wide range ofparameters such as voltage, current, power and energy. There are digital inputs for switch monitoring and relay outputs for remote controllingas well as an over-range alarming feature for voltage and current. Large signals, such as current and voltage can be converted to smaller signalsusing AO output. All data in the meter is accessible via RS485 using open Modbus RTU protocol.•

Solar Power Meter - AcuDC 200